Opens in a new tab

DL envelope size

ISO envelopes · ISO 269

110 × 220 mm

4.33 × 8.66 in · 11 × 22 cm · 4 5/16 × 8 11/16 in

Aspect ratio
1:2
Area
242 cm² (37.5 in²)
Pixels @ 300 dpi
1,299 × 2,598
Also called
DIN Lang, 1/3 A4
Used in
Worldwide except North America

DL is 220 × 110 mm (8.66 × 4.33 in), the standard business envelope in Europe and most of the world. An A4 letter folded in thirds slides straight in.

Compare with
A4DL110 mm220 mm
DL is 100 mm narrower than A4 and 77 mm shorter, with 39% of its area. Print DL on A4 at 135%, or A4 on DL at 52%.
Solid: DL. Dashed: A4. Hover or tap a sheet for its measurements; hatched strips show where one sheet overhangs the other.

DL dimensions in every unit

DL size in inches, cm and mm

DL is 4.33 × 8.66 inches, or 11 × 22 cm (110 × 220 mm).

DL in inches, centimetres, millimetres and points
UnitWidthHeight
Millimetres110 mm220 mm
Centimetres11 cm22 cm
Inches (decimal)4.33 in8.66 in
Inches (fraction)4 5/16 in8 11/16 in
Points311.8 pt623.6 pt
With 3 mm bleed116 mm226 mm

DL size in pixels

At 300 dpi, the usual resolution for print, DL is 1,299 × 2,598 pixels. At 96 dpi, the screen resolution Word and web browsers use, it is 416 × 831 pixels.

DL in pixels at common resolutions
UnitWidthHeight
At 72 dpi312 px624 px
At 96 dpi416 px831 px
At 150 dpi650 px1,299 px
At 200 dpi866 px1,732 px
At 300 dpi1,299 px2,598 px
At 600 dpi2,598 px5,197 px

Set the printer to —

What DL is used for

  • Business letters and invoices on A4 folded in thirds
  • Window envelopes for bank statements and bills
  • Slim invitations and tickets
  • Direct mail and reply envelopes
  • Compliment slips and vouchers

Printing on DL

A4 folded twice into thirds measures 210 × 99 mm, which leaves 5 mm of clearance at each side and 5 mm top to bottom. That is comfortable for one to three sheets. An A5 sheet folded in half (148 × 105 mm) also fits, and an A6 card or postcard goes in flat.

DL is the classic window envelope. The DIN 680 window is 90 × 45 mm, set 20 mm from the left edge and 15 mm from the bottom, which lines up with the address block on a standard DIN 5008 letter. Wallet flaps (on the long edge) are the norm; gummed, self-seal and peel-and-seal are all common.

Royal Mail treats DL as a Letter (up to 240 × 165 mm and 5 mm thick). Most inkjet and laser printers take DL through the manual feed or a dedicated envelope slot, and DL is a preset in every print driver.

Where DL comes from

DL stands for Dimension Lengthwise, from the German DIN Lang. It came out of DIN 678, the German envelope standard, as an envelope for a third of an A4 sheet. ISO 269 (1985) took it into the international C-series envelope family, where it sits alongside C4, C5 and C6 even though its proportions do not follow the C-series formula.

Questions people ask about DL

What size is a DL envelope?

220 × 110 mm, or 8.66 × 4.33 in. It holds A4 folded into thirds.

What does DL stand for?

Dimension Lengthwise, from the German DIN Lang. It was designed for one third of an A4 sheet.

Is DL the same as a No. 10 envelope?

No, but they do the same job. No. 10 is 241.3 × 104.8 mm, so it is 21 mm longer and 5 mm shorter than DL. Each holds its own region's letter sheet folded in thirds.

Where does the window go on a DL envelope?

The standard DIN 680 window is 90 × 45 mm, 20 mm in from the left edge and 15 mm up from the bottom.

Can I print on DL envelopes at home?

Yes. Almost every desktop printer accepts DL through the manual feed. Choose DL in the print dialog and feed the envelope flap-side as the printer manual shows.

ISO envelopes

DL110 × 220 mm
C6/C5114 × 229 mm
C7/C681 × 162 mm
E4280 × 400 mm
B4 envelope250 × 353 mm
B5 envelope176 × 250 mm
B6 envelope125 × 176 mm
Full ISO envelopes chart →

Printable chart

Every ISO envelopes size on one page, in mm and inches.

Build the chart →
About PaperSizes.guide
An independent reference for 324 paper, envelope, photo and card sizes. Every size is drawn to scale and checked against the published standards, and the calculators and data are free to use.
More about the site →