To print an A3 document on A4 paper, open the print dialog, set the paper size to A4 and choose Fit to page (or a custom scale of 71%). Every A size is the same shape, so the page shrinks to fit A4 exactly with no cropping. Going the other way, print an A4 file on A3 paper at 141% and it fills the sheet perfectly.
That is the short version. Below are the exact clicks for Windows, macOS, Adobe Acrobat, Chrome and Word, plus the trick for tiling an A3 page across two A4 sheets when you need it at full size.
Why the numbers are 71% and 141%
A3 (297 × 420 mm) is exactly twice the area of A4 (210 × 297 mm), and both have the same √2 proportions. Because the shape is identical, you scale both dimensions by the same factor: 1/√2 is 0.707, so A3 to A4 is 70.7%, usually rounded to 71%. The reverse, √2, is 1.414, so A4 to A3 is 141%.
This only works so cleanly within the ISO series. If your printer is loaded with Letter or Tabloid paper, the shapes differ and you will need a different percentage. The scale calculator works out the right figure for any pair of sizes.
Printing A3 on A4 in Windows
The Windows print dialog varies by application, but the two settings you need are the same everywhere: the paper size the printer thinks it has, and the scaling applied to the page.
- Press Ctrl+P and choose your printer.
- Open More settings or Printer properties and set the paper size to A4. Do not leave it on the document’s size.
- Find the scaling option. In Microsoft Edge’s PDF viewer it is under Scale, where you choose Fit to printable area. In printer driver dialogs it may be called Fit to page, Scale to fit or Page scaling.
- Check the preview. The A3 page should sit inside the A4 outline with small, even margins.
If your printer driver offers a percentage box instead, type 70 rather than 71. That leaves a little room for the unprintable border most printers have.
Printing A3 on A4 on a Mac
macOS handles this neatly in the standard print sheet, which almost every application uses.
- Press Cmd+P.
- Set Paper Size to A4 (click Show Details if you cannot see it).
- Open the Paper Handling section and tick Scale to fit paper size. Leave Destination Paper Size at A4 and make sure Scale down only is ticked when you are reducing.
- Preview, then print.
For the reverse, A4 onto A3, untick Scale down only so macOS is allowed to enlarge the page.
Adobe Acrobat and Acrobat Reader
Acrobat’s print dialog has the clearest set of options, under Page Sizing & Handling. Understanding the four choices solves most A3 and A4 problems.
- Fit scales the page up or down to fill the selected paper. Use this for A3 to A4 and for A4 to A3.
- Actual size prints at 100%, cropping anything larger than the paper. This is the setting behind most “the edges got cut off” complaints.
- Shrink oversized pages reduces pages larger than the paper but never enlarges smaller ones. It is the safest default for mixed documents.
- Poster tiles a large page across several sheets at full size. More on this below.
Whichever you choose, also confirm the paper size in Printer Properties. Acrobat’s Choose paper source by PDF page size checkbox is useful on multi-tray printers but will confuse a single-tray printer loaded with A4.
Chrome’s built-in PDF viewer
Chrome opens PDFs by default on many machines, and its print dialog is simple. Press Ctrl+P (Cmd+P on a Mac), expand More settings, set Paper size to A4 and change Scale from Default to Fit to page. If you prefer a number, choose Custom and enter 70.
Chrome sometimes reports the paper size from the printer’s last job rather than the current tray, so glance at the preview before you commit.
Microsoft Word
Word gives you two very different ways to move between A3 and A4, and mixing them up is the most common mistake.
The first is to change the document itself: Layout, then Size, then A4. Word reflows the text onto A4 pages, so your page count changes and page breaks move. This is right when you want a genuine A4 document.
The second is to keep the document as A3 and scale only the printout. Press Ctrl+P, click the dropdown that says 1 Page Per Sheet, hover over Scale to Paper Size and pick A4. Nothing in the document changes; each A3 page is simply printed at 71%. This is the choice when the layout must stay intact, for example a poster or a technical drawing.
Tiling A3 across two A4 sheets at full size
Sometimes 71% is too small: a floor plan with fine dimensions, a knitting chart, a wall poster. In that case keep the page at 100% and split it across A4 sheets, then tape or glue the pieces together.
On paper, two A4 sheets placed side by side make exactly one A3. In practice it is not quite that tidy, because printers leave an unprintable border of roughly 4 to 5 mm on each edge. Each A4 sheet therefore prints only about 200 × 287 mm of content, so a full A3 page at 100% needs four tiles rather than two, with a lot of white space.
You have two good options:
- Accept a small reduction. Scale to around 92% and set the overlap to 10 mm. Two A4 sheets now cover the content, and the overlapping strip gives you something to glue.
- Print four tiles and trim. Keep 100%, print four sheets, and cut along the crop marks. Ideal for drawings where the scale must be exact.
In Acrobat choose Poster, set Tile Scale to 100% (or 95%), set Overlap to 10 mm and tick Cut marks and Labels. The preview shows how many sheets you will get before you print. The poster tiling calculator does the same sums for any page size and any printer margin.
A worked example: an A3 site plan for a client meeting
An architect has an A3 landscape site plan and a small office printer that only takes A4. She needs six copies for a meeting and the drawing must remain legible.
She first tries Fit to page. The plan comes out at 71%, and the 2.5 mm dimension text shrinks to about 1.8 mm, which is hard to read. She switches to Acrobat’s Poster mode at 100% with a 10 mm overlap. Because of the printer margins it produces four A4 tiles, but she notices the outer two are almost empty.
Setting Tile Scale to 92% brings it down to two A4 sheets with a comfortable overlap. She prints twelve sheets, tapes them into six A3 plans and the dimensions are still readable. Total cost: a few minutes and one roll of tape.
Common mistakes and how to fix them
- The tray says Letter. Many printers ship with Letter as the default, especially in offices with US software. If your output is cropped at the bottom, set the tray and the driver to A4. The A4 vs Letter comparison shows exactly how the two differ.
- Actual size instead of Fit. The single most common cause of cut-off edges. Change it in the print dialog, not in the document.
- Scaling twice. If the application scales to 71% and the printer driver also scales to fit, you get a tiny page in the middle of the sheet. Scale in one place only.
- Orientation mismatch. An A3 landscape page fits A4 landscape. If the preview shows a small page with huge margins, rotate the orientation to match.
- Bleed and crop marks. A print-ready PDF with bleed is larger than A3, so Fit to page will shrink it by more than 71%. Print the trimmed version instead.
Related: A3 vs Tabloid, paper size finder, all A series sizes.



