US Business Card vs Credit Card

The US business card is 3.5 × 2 in (88.9 × 50.8 mm); a credit card (ISO 7810 ID-1) is 85.6 × 53.98 mm (3.37 × 2.13 in). The business card is 3 mm wider and 3 mm shorter, so it fits a wallet card slot but protrudes slightly at one end.

Side by side

US business card
3.5 × 2 in
Credit card
3.37 × 2.13 in
Wider
US business card, by 0.13 in
Taller
Credit card, by 0.13 in
Print US business card on Credit card
96%
Print Credit card on US business card
94%
Credit cardUS business card88.9 mm50.8 mm
US business card is 3.3 mm wider than Credit card and 3.2 mm shorter, with 98% of its area. Print US business card on Credit card at 96%, or Credit card on US business card at 94%.
Solid: US business card. Dashed: Credit card. Hover or tap a sheet for its measurements; hatched strips show where one sheet overhangs the other.
US business card and Credit card measurements
US business cardCredit cardDifference
Width88.9 mm85.6 mm+3.3 mm
Height50.8 mm54 mm-3.2 mm
Inches3.5 × 2 in3.37 × 2.13 in
Pixels @ 300 dpi1,050 × 6001,011 × 638
Area45.2 cm²46.2 cm²98%
Aspect ratio16:91:0.63
Scale to fitUS business card → Credit card: 96%Credit card → US business card: 94%

Choose US business card when

Use the US business card size for printed cards on paper or board handed out in North America. It is what printers and templates there assume, and it is cheap to print in bulk.

Choose Credit card when

Use the ID-1 credit-card size for plastic cards: membership, loyalty, gift and access cards, and for any card that must fit a card reader or a wallet slot exactly. It is also the base of the European business card.

Which should you use?

Paper cards go by the local business-card size; plastic cards go by ID-1. If a card must sit flush in a wallet, be swiped or tapped, or match a bank card in a stack, use 85.6 × 53.98 mm with 3 mm rounded corners.

Artwork moves between the two only with a small crop or margin. A business-card design on an ID-1 card is scaled to 96 percent by width and loses nothing on height; an ID-1 design on a business card leaves 3 mm of spare width and is cropped 3 mm in height.

The rounded corners are the practical trap. ID-1 specifies a 3 mm radius, and plastic-card printers cut it automatically; paper business cards are square-cornered unless you pay for rounding.

Questions about this comparison

What size is a credit card?

85.6 × 53.98 mm (3.37 × 2.13 in) with 3 mm corner radii, the ISO 7810 ID-1 format used for bank cards, driving licences and ID cards worldwide.

Is a business card the same size as a credit card?

Not in the US. The US card is 88.9 × 50.8 mm, 3 mm wider and 3 mm shorter than a credit card. The European business card (85 × 55 mm) is much closer.

What size should a plastic loyalty card be?

ID-1, 85.6 × 53.98 mm. It fits card readers, wallet slots and card printers, and it stacks flush with bank cards.

Scale one onto the other

The exact percentage for the print dialog, either direction.

Loading Scale Calculator…

Measure it, name it

Not sure which one you have? Type its width and height.

Loading Paper Size Finder…
About papersizes.guide
An independent reference for 336 paper, envelope, photo and card sizes. Every size is drawn to scale and checked against the published standards, and the calculators and data are free to use.
More about the site →