A0 vs A1
A0 is 841 × 1189 mm, one square metre; A1 is 594 × 841 mm, half a square metre. A0 is two A1 sheets side by side and, like every A size, shares the 1:√2 shape, so A1 enlarges to A0 at 141 percent and A0 reduces to A1 at 71 percent.
Side by side
- A0
- 841 × 1,189 mm
- A1
- 594 × 841 mm
- Wider
- A0, by 247 mm
- Taller
- A0, by 348 mm
- Print A0 on A1
- 71%
- Print A1 on A0
- 141%
| A0 | A1 | Difference | |
|---|---|---|---|
| Width | 841 mm | 594 mm | +247 mm |
| Height | 1,189 mm | 841 mm | +348 mm |
| Inches | 33.11 × 46.81 in | 23.39 × 33.11 in | |
| Pixels @ 300 dpi | 9,933 × 14,043 | 7,016 × 9,933 | |
| Area | 9,999.5 cm² | 4,995.5 cm² | 200% |
| Aspect ratio | 1:√2 | 1:√2 | |
| Scale to fit | A0 → A1: 71% | A1 → A0: 141% |
Choose A0 when
Use A0 for large plans, site drawings, wall maps, exhibition graphics and the largest conference posters. It is the biggest sheet most plotters and wide-format printers take from a roll.
Choose A1 when
Use A1 for everyday plotted drawings, most conference posters and large charts. It is easier to handle, to pin up and to carry in a tube, and it is the size most drawing offices issue by default.
Which should you use?
A1 is the sensible default for drawings and posters; A0 is for when the content genuinely needs a square metre. A0 sheets are awkward to unroll on a desk and need a big wall, so use them for site plans and exhibition work rather than routine issue.
Scaling is exact: 141 percent up, 71 percent down. An A0 drawing reduced to A2 (50 percent) or A4 (25 percent) keeps its proportions, which is why ISO drawing offices can issue the same sheet at several sizes.
Both sizes are printed from 841 mm or 914 mm rolls. A0 in portrait uses the full 841 mm width; check that the printer roll is wide enough, since 610 mm rolls only manage A1.
Questions about this comparison
How big is A0 paper?
A0 is 841 × 1189 mm (33.11 × 46.81 in), with an area of one square metre. It is two A1 sheets, four A2, eight A3 or sixteen A4 sheets.
What is the difference between A0 and A1?
A0 (841 × 1189 mm) has twice the area of A1 (594 × 841 mm). A1 is A0 cut in half across its short axis, and both have the same 1:√2 proportion.
What is the US equivalent of A0?
ANSI E (34 × 44 in, 863.6 × 1117.6 mm) is closest. Arch E (36 × 48 in) is larger. Neither has the same proportion as A0.
Scale one onto the other
The exact percentage for the print dialog, either direction.
Measure it, name it
Not sure which one you have? Type its width and height.