A3+ vs A3

A3+ is 330.2 × 482.6 mm (13 × 19 in); A3 is 297 × 420 mm. A3+ is 33 mm wider and 63 mm taller and has a 1:1.46 shape rather than A3's 1:√2. It exists so that A3 artwork can be printed with bleed on a desktop inkjet, and it is the same sheet as US Super B.

Side by side

A3+ Super B (photo)
13 × 19 in
A3
11.69 × 16.54 in
Wider
A3+ Super B (photo), by 1.31 in
Taller
A3+ Super B (photo), by 2.46 in
Print A3+ Super B (photo) on A3
87%
Print A3 on A3+ Super B (photo)
111%
A3+ Super B (photo)A3330.2 mm482.6 mm
A3+ Super B (photo) is 33.2 mm wider than A3 and 62.6 mm taller, with 128% of its area. Print A3+ Super B (photo) on A3 at 87%, or A3 on A3+ Super B (photo) at 111%.
Solid: A3+ Super B (photo). Dashed: A3. Hover or tap a sheet for its measurements; hatched strips show where one sheet overhangs the other.
A3+ Super B (photo) and A3 measurements
A3+ Super B (photo)A3Difference
Width330.2 mm297 mm+33.2 mm
Height482.6 mm420 mm+62.6 mm
Inches13 × 19 in11.69 × 16.54 in
Pixels @ 300 dpi3,900 × 5,7003,508 × 4,961
Area1,593.5 cm²1,247.4 cm²128%
Aspect ratio1:1.461:√2
Scale to fitA3+ Super B (photo) → A3: 87%A3 → A3+ Super B (photo): 111%

Choose A3+ Super B (photo) when

Use A3+ for photo prints at 13 × 19 in, for A3 artwork printed with bleed and crop marks, and for posters that need a little more than A3. It is the largest sheet most photo and proofing inkjets accept.

Choose A3 when

Use A3 for finished documents, drawings, spreadsheets and posters that need no trimming. It fits office printers and A3 frames, portfolios and sleeves.

Which should you use?

A3 is the page; A3+ is the sheet you print it on when the design bleeds. If the artwork has margins, print it on A3 and stop. If colour runs to the edge, print on A3+ and trim.

A3 artwork prints on A3+ at 100 percent with 16 mm each side and 31 mm top and bottom for bleed and marks. A3+ artwork on A3 needs 86 percent. Enlarging A3 to fill A3+ is 111 percent by width but leaves white space at the ends because the shapes differ.

Office laser printers do not take A3+; it is an inkjet size. The driver may call it Super B, 13 × 19, Super A3 or A3+; all are the same 330.2 × 482.6 mm sheet.

Questions about this comparison

What size is A3+ paper?

A3+ is 330.2 × 482.6 mm (13 × 19 in). It is larger than A3 (297 × 420 mm) and is the same sheet as US Super B.

Why does A3+ exist?

To let A3 artwork be printed with bleed and crop marks on a desktop inkjet and then trimmed to size, and to give a 13 × 19 in photo print. Office printers stop at A3.

Is A3+ an ISO size?

No. It is a trade size adopted by inkjet manufacturers. The ISO oversize sheet for A3 is SRA3 (320 × 450 mm), which is used by commercial digital presses.

Scale one onto the other

The exact percentage for the print dialog, either direction.

Loading Scale Calculator…

Measure it, name it

Not sure which one you have? Type its width and height.

Loading Paper Size Finder…
About papersizes.guide
An independent reference for 336 paper, envelope, photo and card sizes. Every size is drawn to scale and checked against the published standards, and the calculators and data are free to use.
More about the site →