Standard photo prints are 4 × 6, 5 × 7 and 8 × 10 in, which need 1200 × 1800, 1500 × 2100 and 2400 × 3000 pixels respectively for a sharp 300 dpi print. Labs in Europe and Asia call the same sizes 4R, 5R and 8R. The catch is that these three sizes have three different aspect ratios, so a photo straight from a camera will only fit one of them without cropping.
The standard sizes in inches, millimetres and pixels
Print sizes are still quoted in inches almost everywhere, even in metric countries, because the formats were fixed when film was cut in inches. The metric figures below are what labs actually trim to, which is why 4 × 6 in becomes 102 × 152 mm rather than 101.6 × 152.4.
| Size (in) | R name | Size (mm) | Pixels at 300 dpi | Ratio | Megapixels |
|---|---|---|---|---|---|
| 2.5 × 3.5 (wallet) | 2R | 64 × 89 | 750 × 1050 | 7:5 | 0.8 |
| 3.5 × 5 | 3R | 89 × 127 | 1050 × 1500 | 7:5 | 1.6 |
| 4 × 6 | 4R | 102 × 152 | 1200 × 1800 | 3:2 | 2.2 |
| 5 × 7 | 5R | 127 × 178 | 1500 × 2100 | 7:5 | 3.2 |
| 6 × 8 | 6R | 152 × 203 | 1800 × 2400 | 4:3 | 4.3 |
| 8 × 10 | 8R | 203 × 254 | 2400 × 3000 | 5:4 | 7.2 |
| 8 × 12 | S8R | 203 × 305 | 2400 × 3600 | 3:2 | 8.6 |
| 10 × 12 | 10R | 254 × 305 | 3000 × 3600 | 6:5 | 10.8 |
| 10 × 15 | S10R | 254 × 381 | 3000 × 4500 | 3:2 | 13.5 |
| 11 × 14 | 11R | 279 × 356 | 3300 × 4200 | 14:11 | 13.9 |
| 12 × 18 | S12R | 305 × 457 | 3600 × 5400 | 3:2 | 19.4 |
| 16 × 20 | 16R | 406 × 508 | 4800 × 6000 | 5:4 | 28.8 |
| 20 × 24 | 20R | 508 × 610 | 6000 × 7200 | 6:5 | 43.2 |
Passport photos sit outside this system. The US wants 2 × 2 in (51 × 51 mm), the UK and most of Europe want 35 × 45 mm, and each country specifies where the face must sit within the frame. Wallet prints are 2.5 × 3.5 in, the same size as a playing card, and labs usually print them four-up on a 5 × 7 sheet. You can see the full family on the photo sizes hub.
What the R names mean
The R series is the naming used by minilabs and photo kiosks in Japan, China, Southeast Asia, Australia and much of Europe. The number is the shorter side in inches: 4R is 4 in on the short edge, 8R is 8 in, and so on. The long side is whatever the traditional print size was, which is why 4R is 4 × 6 but 8R is 8 × 10 rather than 8 × 12.
The S prefix means super, and it marks the 3:2 version of a size. S8R is 8 × 12 in, S10R is 10 × 15 in and S12R is 12 × 18 in. If you are printing uncropped photos from a digital SLR or mirrorless camera, the S sizes are the ones to order.
Some labs also use KG for a 4 × 6 print (from the Japanese hagaki postcard size, 100 × 148 mm) and 2L for 5 × 7 (127 × 178 mm). They are the same paper; only the label changes.
Aspect ratios and why 8 × 10 crops your photo
Aspect ratio is the shape of the image, long side divided by short side. Almost every camera sensor is 3:2 (full frame, APS-C, 35 mm film) or 4:3 (phones, Micro Four Thirds, most compacts). Print sizes were set long before those sensors existed, so most of them do not match.
- 4 × 6 is 3:2. A photo from a DSLR fits exactly. A 4:3 phone photo loses a strip from the long sides.
- 5 × 7 is 7:5, or 1.4. A 3:2 photo loses about 7 per cent of its length; a 4:3 photo loses about 5 per cent of its height. Both are mild crops.
- 8 × 10 is 5:4, or 1.25. A 3:2 photo loses about 17 per cent of its length, which is a full sixth of the frame. Heads get clipped and edges vanish.
- 11 × 14 is 1.27, close to 5:4. 16 × 20 is exactly 5:4. 20 × 24 is 6:5.
The practical rule: if a shot was framed tightly, print it at a 3:2 size (4 × 6, 8 × 12, 12 × 18) and it will arrive as you saw it. If it must be 8 × 10, crop it yourself in your editing software before uploading, so you choose what goes rather than the lab’s automatic centre crop. The aspect ratio checker shows exactly how much any print size will trim from any image.
Worked example: a 12 megapixel phone photo at 8 × 10
A typical phone captures 4032 × 3024 pixels, a 4:3 image. An 8 × 10 print at 300 dpi needs 3000 × 2400 pixels at 5:4. Scaling the photo so the short side is 2400 pixels gives 3200 × 2400, so the lab must trim 200 pixels from the long side, 100 from each end. That is a gentle 6 per cent crop, and the print will be sharp with resolution to spare.
The same photo at 8 × 12 in needs 3600 × 2400 pixels at 3:2. Scaled to 3600 pixels on the long side, the short side becomes 2700, so 300 pixels are trimmed from the height instead. Either way you lose something; the question is only which edge.
How many megapixels do you need?
The 300 dpi figure is the standard for prints viewed in the hand, where the eye can resolve very fine detail. Larger prints are viewed from further away, and 150 to 200 dpi looks just as sharp on the wall. That changes the arithmetic considerably:
- 4 × 6 and 5 × 7: 2 to 3 megapixels at 300 dpi. Any camera made since 2005 will do.
- 8 × 10 and 8 × 12: 7 to 9 megapixels at 300 dpi, or 2 to 3 at 200 dpi.
- 16 × 20: 29 megapixels at 300 dpi, but only 7 megapixels at 150 dpi, which is fine for a print above a sofa.
- 20 × 24 and larger: aim for 150 dpi and use good sharpening. A 12 megapixel file will produce a very acceptable 24 × 36 poster.
What matters more than pixel count is that the image is in focus and not heavily compressed. Send the lab the original full-size JPEG or a TIFF, never a copy that has passed through a messaging app.
Borderless printing
Labs print borderless by default: the image is enlarged by 2 to 3 per cent so it runs past the paper edge and the trim removes the overhang. That is another small crop, so keep important detail away from the very edge of the frame. Home inkjets offer a borderless mode that does the same thing and uses noticeably more ink.
If you want a white border, ask for it explicitly and expect the image area to shrink accordingly. A 4 × 6 with a 0.25 in border has an image area of 3.5 × 5.5 in, which is a 3.14:2 ratio and no longer a clean 3:2.
Lab versus home printing
A high street or online lab prints on silver halide photographic paper exposed by laser and developed chemically. The result is continuous tone, fade resistant and cheap per print: 4 × 6 prints cost pennies in bulk. Labs are almost always the better choice for standard sizes and volume.
A home photo inkjet gives you control over paper, colour and timing, and is the sensible option for the occasional 8 × 10 or larger, for fine art papers, and for proofing. The cost per print is higher and colour management is your responsibility, so calibrate the screen if you go this route.
Framing and mat openings
Ready-made frames follow the print sizes, but a matted frame is sold by its outer size and holds a smaller print. The usual pairings are an 8 × 10 frame with a mat for a 5 × 7 print, an 11 × 14 frame for an 8 × 10 print, and a 16 × 20 frame for an 11 × 14 print.
The mat window is cut about 0.25 in smaller than the print on each side so the mat overlaps the edges and holds it flat. A mat for a 5 × 7 print therefore has a 4.5 × 6.5 in opening. Bear this in mind when composing: anything within 6 mm of the edge disappears behind the mat.
Related: see the detailed pages for 4R (4 × 6 in) and 8R (8 × 10 in), or work out the pixels for any size at any resolution with the pixel and DPI calculator.



